性交故事

性交故事1/12 scale model wayside rail and 1/4 scale wayside rail

Monday, April 18, 2016

Spring Presentation 2



On April 13, 2016, the team presented on the progress made in the project. We have flatten some copper wires and bent all of the PVC pipes for the curves. We found that there is a problem with our show collector. We had it designed to stay static, we found that we need our shoe collector to be dynamic as the boggie follows the track along the turns and inclines/declines.

Below is a link to the presentation.
https://docs.google.com/presentation/d/1NItWeO8ehNjhpO3KxgHjH98Eapm9S3xA_7fZyZygblw/pub?start=false&loop=true&delayms=3000

Thursday, March 10, 2016

Spring Presentation 1

On Wednesday, March 9, 2016, our team presented on our final design for the quarter scale Spartan Superway. We were originally focusing our efforts on the 1/12th scale in the fall, now we will be scaling up the design. We have begun experimenting with ways to bend PVC pipes for the enclosure of the wayside rail. In the presentation that can be viewed in the link below, we show what we have done so far, our current schedule, our predicted costs, about $530, and a few dependable or exposures that we may encounter.



https://docs.google.com/presentation/d/190Bv2QzjylWnLmDUgwWUSG3bUJ_uNQrwXxyKInRjZJ0/edit?usp=sharing


Monday, January 18, 2016

Presentation 3 Fall 2015

Below is the link for presentation 3, where we discuss the project, prime design, functionality, fabrication, testing plans, cost analysis, and the schedule and plans for next semester.

We approximated that we would need to spend about $451.00 for materials and fabrication for the wayside rail for the small scale. It may be slightly more, because we plan to 3-D print some components, and may have to look into outside sources because of the time it takes to 3-D print parts.

https://docs.google.com/presentation/d/1QyxqjK_oj3yLqNpA8hfSr2K4hBd_yz7pW90NG64SjVA/edit?usp=sharing

Tuesday, November 17, 2015

Satus Update

This week our team is working on our final designs for the 1/12 scale wayside rail collector shoes. We have decided that the shoes will be on the sides of the boogie instead of on the top. This is due to the fact that there is not a lot of room on top of the boogies. We are working on CAD drawings for the new design and will have them done by next week. We have talked with the Electrical Engineering group and have have discussed the wayside rails. We are going to need to have about 20 amps running through these rails. In order to allow for this amount of current we will use 12 gauge AWG wire for the wayside rail. With this wire and our new collector shoes we are ready for our final design and prototyping.

Wednesday, October 21, 2015

Presentation #2

Please find our second presentation at the following link.
https://docs.google.com/presentation/d/1gkNuUSqOmkAAeOzg_GZYrvVdR7EYjH_zTF8qwTLFRkk/edit?usp=sharing

Sunday, October 11, 2015

Presentation #1

Please find our first presentation at the following link

https://drive.google.com/file/d/0Bx4ZXg8RzumNMkZpM1N6Umc2NEU/view?usp=sharing

Monday, September 21, 2015

Power Team Proposal

ME 195A
Electric Wayside Pickup Team
Proposal


Name
Skills
Email
Responsibilities
Garrett Gemmel
Electrical contracting, Solidworks, AutoCAD
GGemmel777@gmail.com
Project Management, CAD Design
Michael Hurst
Video Production / Mechatronics / Solidworks / Reports Writing
michael.p.hurst@gmail.com
Write reports, prepare materials for team presentations, research available solutions and communicate with suppliers, assist in fabrication of scale wayside power, assist in CAD modelling of designs.
Dianna Man
AutoCad, Inventor,Thermal/Fluids, Machining, Matlab
mandianna10@gmail.com
Budgeting, Design/CAD, Fabrication, Testing
Karmjot Singh
AutoCAD, Inventor, Machining, MatLab, Arduino
singh.karmjot@gmail.com
Design/CAD, Testing, Fabrication, Integration and Analysis, Scheduling
Matt Holst
Electrical Engineer
mattholst33@gmail.com
Coordinate efforts between EE team and Wayside Power team
Nasrat Haidari
AutoCad, Machining, Analysis, circuits, matlab, and micoprocessor programming
haidarinasrat@gmail.com
Design/CAD, Circuit analysis, testing, Scheduling, Integration, fabrication, and editing

The wayside power team will design a working model for the 1/12 and ¼ scale and will collaborate with the solar and bogie teams to determine the best method of powering our bogies with solar.

Design Requirements
  • Hot rail on 1/12 and ¼ scale models to be kid safe for Maker Faire
  • Power supply and circuitry to power 10 bogies on the 1/12 scale and 2 bogies on the ¼ scale
  • Aesthetically pleasing and durable implementation of wayside power
  • Stationary source

Deliverables
  • Working model for wayside power on 1/12 and ¼ scale

Things to Accomplish (Action Items)
  • Determine power requirements of bogies on 1/12 and ¼ scale
  • Determine safe limits for working with electric circuits around children
  • Find a way to power bogie and charge battery from wayside
  • Discuss several design solutions for wayside power and create a plan for narrowing down to a final design choice
  • Work closely with the solar team and the track design team.


Sketches
Figure 1. Different collector shoe designs commonly used on electric trains

Figure 2. Collector rail preliminary sketch


2015-09-14 12.04.42 pm.png
Figure 3. Preliminary design for collector rail and shoe


Preliminary Gantt Chart


2015-09-14 01.40.47 pm.png

Things to buy:
  • Raw Aluminum for creating parts
    • A 12” by 12” piece of stock Aluminum is $187.00, available here.
  • Wiring
    • Can be bought at HomeDepot.
  • A battery for testing (need to decide 9 Volts or 12 Volts)
    • 12 V, 5Ah battery for $15.00, available here

  • Motor for testing
    • Mini 5V-15V 12V DC Motor 360 Motor 6000RPM with Speed Encoder for $4.00 available here.

      • Need to match the motors that the 1/12 model actually uses.